Home >> Products >> Electric sander >> orbital Sander machine for wood
  • orbital Sander machine for wood

  • orbital Sander machine for wood

  • orbital Sander machine for wood

  • orbital Sander machine for wood

  • orbital Sander machine for wood

  • orbital Sander machine for wood

orbital Sander machine for wood

Have you ever seen a sander that can sand a piece of wood in 10 seconds? ANSIAUTO will take you to take a look. It can smooth and clean a rough piece of wood in just 10 seconds. If you also need such a sander, please contact us

Attribute

Disc Size: 150mm, 6″

Product Description

How to get started ANSIAUTO brushless sander
When unpacking the tool, make sure it is intact, complete and has not been damaged in transport. Never
use a damaged tool.
Before use,check that the backing pad is correctly attached and tightened.Connect the power cord to
the sander.Connect the power cord to a grounded outlet(220-240V,50/60Hz).
Operating instructions
• The tool is intended to be operated as a hand held tool.The tool can be used in any position.
• Make sure the sander is switched off.Select a suitable abrasive and secure it to the backing pad.Make
sure the abrasive is centred on the backing pad.
• Switch on sander by pressing the ON/OFF key .The sander LED is now green when it is on.
• The sander can now be started by pressing the lever.
• The rpm can be adjusted in the range 4000 to 10000 rpm, by pressing + and -
• The tool has two speed control modes.In the default mode the speed can be adjusted linearly by
changing the position of lever. In the other mode the speed remains fixed at the set max rpm when tool
is running .When the rpm + and rpm -buttons are pressed simultaneously the tool toggles between the
two controlling modes.
• When sanding ,always place the tool on the work surface before starting the tool.Always remove the
tool from the work surface before stopping it. This will prevent gouging of the work surface due to
excess speed of the abrasive.
• When sanding is finished, turn off the sander by pressing the on/off key.The sander LED is now turned
off

MODEL

J05101

NO LOAD SPEED

4000-10000RPM

RATED VOLTAGE

110-120V/220V-240V

RATED FREQUENCY

50-60HZ

RATED INPUT POWER

350W

ORBIT SIZE 

3/16″ (5MM)

BACKING PAD SIZE

5″ (125MM) & 6″(150MM)

NOISE LEVEL

71db (LOW NOISE)

CABLE LENGTH

5MM

INCLUDES

Sander

 

Vacuum Hose Adapter

Sanding Pad *2 (125mm&150mm)

Pad Wrench *1

5” P80 Sanding Disc *1

5” P120 Sanding Disc*1

6” P80 Sanding Disc *1

6” P120 Sanding Disc*1

PACKAGE

COLOR BOX

 

orbital Sander machine for wood

orbital Sander machine for wood

Looking for ideal elelctric sander Manufacturer & supplier ? We have a wide selection at good prices to help you get creative. All the Car SANDER are quality guaranteed. We are China Origin Factory of orbital sander If you have any question, please feel free to contact us.